Observations & Corrective Actions

333-062-0135(1) VIOLATION OF OAR 333-062-0135 (1) A flow meter is not provided, not properly installed, not located or is not functioning.NO VISIBLE FLOW GAUGE
Corrective Actions: Install and maintain a flow meter in the recirculation piping, measuring flow in gallons per minute. Mount the flow meter per manufacturer's recommendation in a location where it can be easily read, and on a length of straight pipe.ADD FLOW METER

333-062-0165(1.3) VIOLATION OF OAR 333-062-0165 (1) The combined chlorine (chloramine) is greater than 0.5 ppm (0.5 mg / kg). Specifically:1.4 PPM
Corrective Actions: Maintain the combined chlorine (chloramine) residual within the range set out in spa Water Quality Parameters, OAR 333-062-0165, and Table 1, the ideal being 0.0 ppm, measured combined chlorine. Combined chlorine (chloramines) is irritating to swimmers and an air quality and health concern at indoor pools. Adequate ventilation is necessary when applying treatment in the spa pool basin.ADJUST DOWN TO 0PPM

333-062-0165(1.7) VIOLATION OF OAR 333-062-0165 (1) The pH is less than 7.2 or greater than 7.6. specifically:PH IS 7.8
Corrective Actions: Maintain the pH levels within the range set out in the spa Water Quality Parameters, OAR 333-062-0165, and Table 1, the ideal being 7.2 - 7.6. See spa pool closure criteria.ADJUST DOWN

333-062-0165(1.9) VIOLATION OF OAR 333-062-0165 (1) The total alkalinity level does not comply with required water quality parameters. Specifically:TOTAL ALKALINITY IS 50 PPM
Corrective Actions: Maintain the total alkalinity level greater than 80 ppm and less than 175 ppm, the ideal range being 80-125 ppm. Most modern spa finishes are durable within this range as long as the calcium saturation is maintained and the water is balanced.ADJUST TO ACCEPTABLE LEVELS